Smeg DI614, Instruction Manual

Page: 16 / 45

16
5
.5 Standard programmes
Press on/off button ( A ) to switch machine on.
When the initial system message for programmes setting appears
in the display window select “No” (button
B ) to disable rapid
programming.
To select another programme, press (
B ) repeatedly until the
programme you want is displayed
The display will show the programme selected, the temperature
and the duration of the programme. To start this programme close
the door (buzzer sounds, if enabled). It will sound again at the end
of the programme (if activated).
See
TABLE OF PROGRAMMES on following pages.
The second line of the display will
now show the scheduled duration of the
programme in minutes.
• The temperature which appears before the programme name
indicates its type (e.g. 45° delicate programme, 55° economy,
65° intensive, etc.); the actual temperature is displayed, stage by
stage, while washing is in progress.
• Programmes duration, temperature and consumption fi gures are
guideline, since they depend on various factors, such as type of
load, intake water temperature, room temperature, etc.
If the dishwasher door is open or not properly closed, the
washing cycle will not start
If the door is opened with the dishwasher in operation, a long
buzzer sounds and “ Pause ” appears on the bottom line of the
DISPLAY (G) . Next time the door is closed the programme will
continue from where it stopped.
If the temperature inside the tank exceeds 50°C, the
programme will restart after about 30 seconds.
EN Instructions for the User