14
- water continues to enter the tank due to tank pressure
switch defect
Err24
Boiler temperature probe malfunction
boiler temperature probe disconnected or not working
Err25
Boiler water filling malfunction
Check that the water intake tap is on and the dynamic
pressure in the intake system, inspect the water intake
filter and clean if necessary.
If the problem persists:
- boiler pressure switch has failed (continuous empty
reading)
- pipe leaking/disconnected
Err26
Boiler emptying malfunction
- check that rinsing spray arm nozzles are clean
- boiler pressure switch has failed (continuous full reading)
- rinsing pump not working
Err27
Boiler emptying malfunction – with tank full
Boiler pressure switch has failed (continuous full reading)
Err28
Boiler heating malfunction (overheating)
-circuit board relay failure, or
- contactor failure
8 INSTRUCTIONS FOR THE USER
8.1 Control
panel
On-off button
Program selection button
Start CONFIRM/PAUSE button
Total emptying button (tank and boiler)
Additional function selection button
L1
Main power on light
L2
Intake/standby cycle in progress light (orange/green)
L3
Pump-out in progress light
No rinse-aid symbol (if a system for monitoring outside the dishwasher is provided)
Tank heating element on symbol
No salt symbol (if softener is fitted)
Boiler element on symbol
No detergent symbol (if a system for monitoring outside the dishwasher is provided)
