11
EN
To enable auto-start, proceed as follows:
1. Press (B2) to enter the menu;
2. Press (B10) or
(B8) until the display (B) shows
AUTO-START;
3. Select the function by pressing
: The time setting panel
appears on the screen;
4. Press or
corresponding to the hours and minutes
until the required auto-start time is displayed;
5. Press
or
to enable or disable au-
to-start.
6. To confirm, press
(to cancel and go back to the
settings menu press
), then press
to go
back to the homepage.
The auto-start time is now set and the corresponding symbol is
displayed next to the time to indicate that the function has been
enabled.
Please note:
When the appliance is turned off using the main switch (A21),
the auto-start setting if enabled, is lost.
Auto-off (standby)
Auto-off can be set so that the appliance goes off after 15 or 30
minutes, or 1, 2 or 3 hours of no use.
To programme Auto-off, proceed as follows:
1. Press (B2) to enter the menu;
2. Press (B10) or
(B8) until the display (B)
shows AUTO-OFF, together with the current selection (15 or
30 minutes, or 1, 2 or 3 hours);
3. Press on the display to select the required value;
4. Press
to go back to the homepage.
Auto-off is now programmed.
Cup warmer
To warm the cups before making coffee, it is possible to activate
the cup warmer (A24) and put it above the cups.
1. Press "
" (B2) to enter the menu;
2. Press
(B10) or
(B8) until the display (B) shows "
CUP WARMER";
3. Press to activate-
or de-activate -
the cup warmer.
4. Press "
" to go back to the homepage.
Energy saving
Use this function to enable or disable energy saving mode. When
enabled, the function guarantees reduced energy consumption
in compliance with European regulations. When it is disabled,
warming time is reduced.
To disable or enable "Energy Saving", proceed as follows:
1. Press (B2) to enter the menu;
2. Press (B10) or
(B8) until ENERGY SAVING ap-
pears on the display (B);
3. Press to enable-
or disable-
en-
ergy saving.
4. Press
to go back to the homepage.
Coffee temperature
To modify the temperature of the water supplied to make the
coffee, proceed as follows:
1. Press (B2) to enter the menu;
2. Press (B10) or
(B8) until the display (B) shows
COFFEE TEMPERATURE together with the current selection
(LOW, MEDIUM, HIGH, OR MAX);
3. Press to select the required temperature;
4. Press
to go back to the homepage.
Water hardness
For instructions related to setting water hardness, see section
“Setting water hardness”.
Selecting the language
To modify the language of the display (B), proceed as follows:
1. Press (B2) to enter the menu;
2. Press (B10) or
(B8) until the display shows
SET LANGUAGE;
3. Press : press
or
until the flag corresponding
to the required language is shown and then select it;
4. Press
2 times to go back to the homepage.
Sound notification
This enables or disables the beep emitted by the machine each
time an icon is pressed or an accessory is inserted/removed. To
disable or enable the beep, proceed as follows:
1. Press (B2) to enter the menu;
2. Press (B10) or
(B8) until the display (B) shows
BEEP;
3. Press to enable-
or disable-
the
sound notification;
4. Press
to go back to the homepage.
Light
This function enables or disables the lights (A6). The cup lights
(A18) come on each time coffee beverages are produced, hot
milk is made and during each rinse cycle and turn off after a few
seconds.
Summary of Contents for CMS4104N
