Smeg BGF01US User Manual Download Page 8

Use

10

3 Use

“Blender US version only”

Volts: 120 Volts AC only. 
Hertz: 60 Hz 

•  Do not use an extension cord. If the 

power supply cord is too short, have a 
qualified electrician or service technician 
install an outlet near the appliance. 

•  A short power supply cord (or 

detachable power supply cord) should 
be used to reduce the risk resulting from 
becoming entangled in or tripping over a 
longer cord. 

•  Longer detachable power supply cords 

or extension cords are available and 
may be used if care is taken when using 
them. 

If a longer detachable power supply cord 
or extension cord is used: 
•  The marked electrical rating of the 

power supply cord or extension cord 
should be at least as great as the 
electrical rating of the appliance. 

•  The cord should be arranged so that it 

will not hang over the countertop or 
tabletop where it can be pulled on by 
children or tripped over unintentionally. 

•  If the appliance is of the grounded type, 

the extension cord should be a 
grounded 3-prong type cord. 

Electrical Shock Hazard

•  Plug into a grounded 3-prong outlet.
•  Do not remove the ground prong.
•  Do not use an adapter.
•  Do not use an extension cord.
•  Failure to follow these instructions can 

result in death, fire, or electrical shock.

Your blender has a 3-prong 
grounded plug. To reduce the risk 
of electrical shock, this plug will fit 
into an outlet only one way. If the 
plug does not fit in the outlet, 
contact a qualified electrician. Do 
not modify the plug in any way. 

Summary of Contents for BGF01US














Reviews: