Smeg BGF01US User Manual Download Page 6

Important Safeguards

8

1.4 Manufacturer liability

The manufacturer shall not be liable for 
injuries or property damage caused by:
•  Use of the appliance other than as 

envisaged

•  Not having read the user manual
•  Tampering with any part of the 

appliance

•  Use of non-original spare parts
•  Failure to observe the safety instructions.

1.5 Disposal

•  

Old appliances do not belong in 

household waste!

 To comply with 

current legislation, old appliances, on 
reaching the end of their useful lives, 
should be taken to a disposal facility 
where they can be sorted. In this way, 
any valuable material contained in the 
old appliances can be recycled, helping 
to protect the environment. The relevant 
local authorities or their waste disposal 
operators can provide further 
information.

Our appliances are packed in non-
polluting and recyclable materials.
•  Dispose of the packing materials at an 

appropriate disposal facility.

Warning

•  This product contains a chemical known 

by the State of California to cause 
cancer, birth defects or other 
reproductive harm.

•  This appliance can cause low-level 

exposure to some of the substances 
listed, including benzene, 
formaldehyde, carbon monoxide, 
toluene, and soot.

Electrical voltage 

Danger of electrocution

•  Disconnect the main power supply.
•  Disconnect the power cable from the 

electrical system.

Plastic packaging

Danger of suffocation

•  Do not leave the packaging or any part 

of it unattended.

•  Do not let children play with the plastic 

bags.

Summary of Contents for BGF01US














Reviews: