Smeg BGF01US User Manual Download Page 5

Important Safeguards

7

ENITEN

1 Instructions

1.1 Introduction

Key information for the user:

1.2 This user manual

This user manual is an integral part of the 
accessory and must therefore be kept in its 
entirety and in an accessible place for the 
whole working life of the accessory.

1.3 Intended use

•  The “Bottle to go” accessory can be 

used indoors and outdoors.

•  The “Bottle to go” accessory can only be 

used together with the 

BLF01

 blender. 

The accessory can be used to blend, mix 
and emulsify various ingredients for 
preparing drinks, juices and smoothies to 
be enjoyed indoors or out. 

•  Do not use the accessory for anything 

other than its intended use.

•  This accessory may not be used by 

people of reduced physical and mental 
capacity, or without sufficient experience 
and knowledge (including children), 
unless they are supervised or instructed 
by adults who are responsible for their 
safety.

Instructions

General information on this user 
manual, on safety and final 
disposal.

Description

Description of the appliance and 
the accessory.

Use

Information on the use of the 
appliance and the accessory.

Cleaning and care

Information for proper cleaning and 
maintenance of the appliance and 
the accessory.

Safety instructions

Information

Advice

The California Safe Drinking 
Water and Toxic Enforcement Act 
requires the Governor of 
California to publish a list of 
substances known to the State of 
California to cause cancer, birth 
defects or other reproductive harm, 
and requires businesses to warn 
customers of potential exposure to 
such substances. 

Summary of Contents for BGF01US














Reviews: