Instructions for the User
76
7. DESCRIPTION OF FRONT PANEL CONTROLS
All the control and monitoring devices are clearly in view on the front panel. The table below provides the
key to the symbols used.
OVEN THERMOSTAT
FRONT LEFT-HAND COOKING ZONE
FUNCTION SELECTOR
KNOB
REAR LEFT-HAND COOKING ZONE
REAR RIGHT-HAND COOKING ZONE
FRONT RIGHT-HAND COOKING ZONE
CENTRAL COOKING ZONE
Before using the oven, check that the display is showing the symbol
(see point “10. ELECTRONIC
PROGRAMMER”).
HOB CONTROL KNOBS
Standard heating
The ring beside each knob identifies the corresponding cooking zone. To switch
it on, turn the knob to the required setting. Setting is on a gradual scale, so all
the intermediate positions between the numbers can be used.
To switch off the zone, return the knob to the
setting
Dual heating
The ring beside each knob identifies the corresponding
cooking zone. To heat the inner cooking zone, turn the knob
to the required setting. To heat both cooking zones (inner
and outer) simultaneously, turn the knob to
/
/
and
then release it. The knob will return to the maximum setting.
To regulate the heating level, turn the knob anti-clockwise to
the setting required. To return to heating of the inner cooking
zone, turn the knob to
and then turn it to the required
setting. To switch off the zone, return the knob to
