Instructions for the User
84
12.EXTRAORDINARY MAINTENANCE
Occasionally, the oven will require minor servicing procedures or the replacement of parts subject to
wear and tear, such as gaskets, light bulbs, etc. The specific operations for each procedure of this kind
are provided below.
Before carrying out any operations, disconnect the appliance from the electricity supply.
12.1 Changing the light bulb
Remove the protective cover
A
by unscrewing it clockwise; replace the bulb
B
with another of the same
type (25 W). Replace the protective cover
A
.
Use only light bulbs approved for ovens (T 300°C).
12.2 Removing the door
Raise levers
B
and hold the door on both sides with both
hands near hinges
A
and. Lift up the door forming an
angle of about 45° and remove. To refit, slide the hinges
A
in the grooves, drop the door and release levers
B
.
12.3
Oven door seal
To permit thorough cleaning of the oven, the seal may be removed. Before removing
the seal, take off the door as described above. Once the door has been taken off, lift
the tabs at the corners as shown in the figure.
