background image

8 EN

product is used without grounding in 
accordance with the local regulations.
•  Connection must comply with 

national regulations.

•  Power cable plug must be within easy 

reach after installation.

•  The voltage and allowed fuse or 

breaker protection are specified in 
the “Technical specifications” section. 
If the current value of the fuse or 
breaker in the house is less than 10 
Amps, have a qualified electrician 
install a 10 Amp fuse.

•  The specified voltage must be equal 

to your mains voltage.

•  Do not make connections via 

extension cables or multi-plugs. 

•   The main fuse and switches must 

have a contact distance of minimum 
3 mm.

B

 Damaged power cable must be 

replaced by the Authorized Service 
Agent.

B

 If the product is faulty, it must not be 

operated unless it is repaired! There is 
the risk of electric shock!

First use

Before starting to use the product, make 
sure that all preparations are made in 
accordance with the instructions in 
sections "Important safety instructions" 
and "Installation".

Disposing of packaging 

material

Packaging materials are dangerous to 
children. Keep packaging materials in 
a safe place away from reach of the 
children.
Packaging materials of the product are 
manufactured from recyclable materials. 
Dispose of them properly and sort 
in accordance with recycled waste 
instructions. Do not dispose of them with 
normal domestic waste.

Transportation of the product

1.  Unplug the product before 

transporting it.

2.  Remove the water drain (if any) and 

chimney connections.

3.  Drain the water in the product 

completely.

A

 We recommend carrying the product 

in upright position. If it is not possible 
to carry the machine in the upright 
position, we recommend carrying 
it by tilting towards the right side 
when looked from the front. After the 
product is moved to its new place, 
you should wait for 12 hours before 
starting it.

Disposing of the old product

Dispose of the old product in an 
environmentally friendly manner.
Refer to your local dealer or solid waste 
collection centre in your area to learn how 
to dispose of your product.
For children's safety, cut the power 
cable and break the locking mechanism 
of the loading door so that it will be 
nonfunctional before disposing of the 
product.

Summary of Contents for ASC72S




























Reviews: