background image

7 EN

undercounter installation part. 

•  Leave at least 3 cm of space around 

the sides and the rear wall of the 
product when installing it under a 
counter or in a cupboard.

Mounting over a washing 

machine

•  A fixing device should be used 

between the two machines when 
installing the dryer above a washing 
machine. The fixing device (KITSPF-1) 
must be installed by the Authorized 
Service Agent.

•  Total weight of the washing machine 

and the dryer -with full load- when 
they are placed on top of each other 
reaches to approx. 180 kilograms. 
Place the products on a solid floor 
that has sufficient load carrying 
capacity!

Connecting to the drain

In products equipped with condenser 
unit, water accumulates in the water tank 
during the drying cycle. You should drain 
accumulated water after each drying 
cycle.
You can directly drain accumulated water 
through the water drain hose supplied 
with the product instead of periodically 
draining the water collected in the water 
tank.

Connecting the water drain hose

1.   Pull hose in the product by hand in 

order to disconnect it from where it is 
connected. Do not use any tools to 
remove the hose. 

2.   Connect one end of the drain hose 

supplied separately with the product 
to the connection point from where 
you removed the hose of the product 
in previous step.

3.   Connect the other end of the drain 

hose directly to the wastewater drain 
or to the washbasin. 

Hose must be fixed in every type 
of connection. Your house will be 
flooded if the hose comes loose 
during water discharge.

C

 Water drain hose should be attached 

to a height of maximum 80 cm.

C

 Make sure that the water drain hose 

is not stepped on and it is not folded 
between the drain and the machine.

Adjusting the feet

In order to ensure that the product 
operates more silently and vibration-free, 
it must stand level and balanced on its 
feet. Balance the machine by adjusting 
the feet.
Turn the feet to left or right until the 
machine stands level and firmly.

C

 Never remove the adjustable feet 

from their housings.

Electrical connection

Connect the product to a grounded outlet 
protected by a fuse complying with the 
values in the "Technical specifications" 
table. Our company shall not be liable 
for any damages that will arise when the 

Summary of Contents for ASC72S




























Reviews: