Instructions for the User
30
N.B. - during preheating and cooking, whenever the door is opened the
message "door" will appear on the display and a beep will sound to warn
the user that the door must be closed while these operations are in
progress.
4.9
Modifying a previously edited program
To modify one of the programs, turn the knob to one of the programs from
P1 to P14 edited previously.
The parameters saved earlier will appear on the display.
Hold down STOP for 2 seconds.
The display shows U t°C.
Press START to display the cooking temperature.
Press START or keep it pressed to increase the cooking temperature;
each time START is pressed the temperature increments by 1°C (from 50°
to 300°), or hold START down for increments of 5°C.
Press STOP to move on to displaying the next parameter
The display shows U Ct.
Press START to display the cooking time.
Press START or keep it pressed to increase the cooking time (from 1 min.
to 99 min.).
Press STOP to move on to displaying the next parameter
The display shows U Ht only if Ut°C is set > 150°C
Press START to display the humidification cycles.
Press START or keep it pressed to increase the number of humidification
cycles (from 0 to 6 cycles where 0 means conventional fan-mode cooking
without the aid of humidification).
Press STOP to complete the program editing procedure.
The display shows UEnd.
The parameters set are now saved in the chosen program.