Instructions for the user
88
9.9
Pyrolysis: automatic oven cleaning
Pyrolysis may be carried out at any time of the day or night (if you wish to benefit
from the lower cost of electricity overnight).
During the first automatic cleaning cycle, unpleasant odours may occur due to
the normal evaporation of oily manufacturing substances. This is an absolutely
normal phenomenon which disappears after the first cleaning cycle.
Before starting the automatic cleaning cycle, make sure that the oven does not
contain any foods or large spills from previous cooking operations.
During the pyrolysis cycle, a door locking device makes it impossible to open the
door.
9.9.1
Before starting the automatic cleaning cycle
Pyrolysis may be carried out at any time of the day or night (if you wish to benefit
from the lower cost of electricity overnight).
• Completely remove all accessories from inside the oven.
• Remove the guide frames, see “9.5.1 Removing guide frames”.
In order not to damage the internal glass panel
, it should be cleaned in
accordance with the usual procedure before starting the automatic cleaning
cycle.
For very stubborn encrustations spray an oven cleaning product onto the glass
(read the warnings on the product); leave for 60 minutes, then rinse and dry the
glass using kitchen roll or a microfiber cloth.
• At the end of the cleaning cycle, when the oven has cooled down, reinsert
the frames by repeating the previously used procedure in reverse order.
• Make sure that the oven door is firmly closed.
