background image

Instructions for the user

75

DEFROSTING: 

Rapid defrosting is helped by switching on the

fan to ensure uniform distribution of room temperature air inside
the oven.

ECO: 

indicates which function gives the least energy

consumption. Using the grill and the bottom heating element plus
the fan is particularly suitable for heating up food, as it provides
low energy consumption.

WIDE GRILL: 

The heat coming from the grill element gives

perfect grilling results, especially for thin and medium thickness
meat and, in combination with the rotisserie (when present), it
allows food to be browned evenly at the end of cooking. Perfect
for sausages, ribs and bacon. This function enables large
quantities of food, particularly meat, to be grilled evenly.

ROTISSERIE GRILL: 

The rotisserie works in combination with

the grill element allowing food to be perfectly browned.

TURBO: 

The combination of fan-assisted cooking and traditional

cooking enables different foods to be cooked on several levels
extremely quickly and efficiently, without any transfer of odours
and flavours. Perfect for large volumes that call for intense
cooking.

PYROLYSIS: 

When this function is set, the oven reaches temperatures of up to

500°C, destroying all the grease which forms on the internal walls.

Summary of Contents for A1PYID-7















































Reviews: