BACnet Router Start-up Guide
Page 44 of 51
Appendix A.6. Change User Management Settings
•
From the FS-GUI page, click Setup in the Navigation panel.
•
Click User Management in the navigation panel.
NOTE: If the passwords are lost, the unit can be reset to factory settings to reinstate the default
unique password on the label. For recovery instructions, see the
. If the default unique password is lost, then the unit must be mailed
back to the factory.
NOTE: Any changes will require a FieldServer reboot to take effect.
Appendix A.6.1. User Management
•
Check that the Users tab is selected.
User Types:
Admin
– Can modify any settings on the FieldServer.
Operator
– Can modify and view any data in the FieldServer array(s).
Viewer
– Can only view settings/readings on the FieldServer.
Figure 47: FS-GUI User Management
