-6-
1.3 Wiring of the DC plug
If the AC adapter is not selected as an option, wire the attached DC plug with the procedure below.
(1) Remove the cover from the DC plug body.
(2) Strip the end of the lead wires by 3 to 4 mm, and insert the lead wires into the cover, then wire them to
the terminals. Mount a heat-shrinkable tube onto the lead wire on the terminal A side to prevent
short-circuit.
-Terminal A (shorter side): Connect the 24 VDC wire.
-Terminal B (longer side): Connect the 0V wire.
(3) Solder the wires and bend and clamp the crimping area of terminal B with pliers.
Protect the terminal A side with a heat-shrinkable tube.
(4) Mount the cover onto the body and confirm that the lead wires are correctly connected.
0.2 to 0.33mm
2
(
AWG ♯22 to 24
)
Coating outside diameter: 1.5 to ø1.7mm
Terminal A
Heat-shrinkable tube
Terminal B
Cover
Lead wire
24 VDC wire
0V wire
Crimping area
Heat-shrinkable tube
Terminal A
Terminal B
Cover
Plug body
Lead wire
Plug body
Cover
