C
HAPTER
5
| Operation Modes
Setup Using the OSD Menu
– 68 –
N
OTE
:
To access the remote, see
“Setup Using the OSD Menu” on page 67"
Figure 62: Setup Main Page
N
ETWORK
Use the navigation buttons on the remote to select the Network menu and
click OK. The following menu items are available:
■
Wired Connection
—
Select this item to change the SMCWTVA100
IP settings to either DHCP or Fixed IP.
■
Device Name
—
Select this option to set a new device name for the
SMCWTVA100. Note the default name is always: SMCWTVA100 xxx.
■
WIFI Connection
—
In Bridge to Wireless mode select this option to
connect the SMCWTVA100 to a Wi-Fi access point.
■
Virtual AP Setup
—
Use this menu item to change the
SMCWTVA100’s wireless access point settings such as:
●
radio band (2.4 or 5 GHz)
●
wireless security (disabled or WPA/WPA2)
●
wireless security password