C
HAPTER
3
| Installation Guide
Non-Bridged Connection Setups
– 27 –
Figure 10: “Wired” Connection Setup
W
IRELESS
C
ONNECTION
S
ETUP
In this mode, as shown in
Figure 11
, your SMCWTVA100 connects directly
to a local WLAN using its Wi-Fi interface. All devices (except those using
Miracast) can connect to the SMCWTVA100 over the local W/LAN in order
to screencast. Use the “Bridge over Wireless” mode in the Quick Connect
setup to use this mode.
Figure 11: Wireless Connection Setup
H
ARDWARE
R
ESET
TO
F
ACTORY
D
EFAULT
S
ETTINGS
To reset all configuration to the factory default press the Mode and Power
On/Off button (see
“Key Hardware Features” on page 16
) simultaneously
for five (5) seconds.
The SMCWTVA100 will reboot and initialize with its original factory default
configuration.