Quick Start Guide
– 2 –
responsible for compliance with local regulations concerning items such as
antenna power, use of lightning arrestors, grounding, and radio mast or tower
construction. Therefore, it is recommended to consult a professional contractor
knowledgeable in local radio regulations prior to equipment installation.
Follow these steps to install the AP:
1. Unpack the AP
Unpack the AP and check the package contents.
◆
WAP3110-L Enterprise Access Point
◆
AC Power adapter
◆
Console cable (RJ-45 to DB-9)
◆
Quick Start Guide (this guide)
◆
Regulatory and Safety Information
◆
Documentation CD — includes
Installation Guide
2. Mount the AP
After planning your installation, mount the unit on a wall or suspended ceiling
T-rail.
.
Mounting on a Wall
Set two screws in the wall 6.2 mm (2.4 in.) apart.
Slide the AP’s wall mounting slots down onto the screws so that the unit is secure.
1
2
1
2