VT325 Series
Specific Product Precautions (3)
Be sure to read this before handling the products.
Mounting
When mounting valves on the manifold base, the mounting
orientation is decided. If it is mounted in the wrong direction,
connected equipment may malfunction.
Changing from N.C. to N.O.
The valves are assembled as N.C. valves at the time of shipment.
By removing the two retaining screws from the desired valves,
and rotating each valve body 180° and reassembling it on the
manifold base, it is possible to reassemble an N.C. valve as an
N.O. valve. (When doing so, make sure that a gasket is attached
to the mounting surface of the valve.) Properly tighten the screws.
The tightening torque of the retaining screws is 3 N·m.
A single valve unit port location
- 10 -
No.VT325
∗∗
-OMK0002-B
