SMC Networks TigerSwitch 10, Installation Manual

Page: 25 / 86

D
ESCRIPTION OF
H
ARDWARE
1-5
Optional Media Extender Modules
Optional 10/100/1000BASE-T Module (SMC6824GT)
Figure 1-4 Single-Port 1000BASE-T Gigabit Module
Using Category 5, 5e, or 6 twisted-pair cable you can connect to another
device up to 100 m (328 ft) away. The 1000BASE-T module operates at
10/100/1000 Mbps. At 1000 Mbps it operates at full duplex and supports
auto-negotiation of speed and flow control. At 10/100 Mbps it supports
auto-negotiation of speed, duplex mode (i.e., half or full duplex), and flow
control. Note that you should first test the cable installation for IEEE
802.3ab compliance. (See “1000BASE-T Cable Requirements” on page
B-5.)
Table 1-2 System Status LEDs
LED Condition Status
PWR On Green The unit’s internal power supply is operating
normally.
Off The unit has no power connected.
Diag On Green The system diagnostic test has completed
successfully.
Flashing Green The system diagnostic test is in progress.
On Amber The system diagnostic test has detected a
fault.
10/100/1000BASE-T Gigabit Module
SMC6824GT