SMCWPCI-N3
300Mbps Wireless N PCI Adapter
25
Figure 3-11
Super and XR are both Wireless 11g standard. These standards would extend the data rate to
108Mbps.
3.2.7
Auto Profile Selection Management
The auto selection feature allows the adapter to automatically select a profile from the list of
profiles and use it to connect to the network. To add a new profile into the Auto Selected Profiles
list, please follow these steps.
1. On the Profile Management screen (shown in Figure 3-3), click
Order Profiles
.
2. The Auto Profiles Selection management window will appear (shown in Figure
3-12
) with a list
of all created profiles in the Available Profiles.
Figure 3-12
3. Highlight the profiles to add to auto profile selection, and click
Add
. The profile will appear in
the Auto Selected Profiles box.
4. Highlight a profile in the Auto Selected Profiles box.
5. Click
Move Up
or
Move Down
to move the selected Profile up or down or click on remove to
remove the selected profile from the list.
)
Note:
The first profile in the Auto Selected Profiles box has highest priority, while the last profile has the
lowest priority.
