SMCWPCI-N3
300Mbps Wireless N PCI Adapter
21
This screen below allows you to make advanced configuration for the profile.
Figure 3-7
¾
Power Save Mode -
Please select the power save mode in the drop-down list.
•
Maximum
–
In the Maximum mode the adapter will periodically query the Access Point to
verify if there is any waiting message/packet in the buffer
•
Normal -
Normal mode uses maximum when retrieving a large number of packets, then
switches back to power save mode after retrieving the packets.
•
Off -
Turns power saving off, thus powering up the Wireless PCI Adapter continuously for
a short message response time.
¾
Network Type:
There are basically two modes of networking:
•
Infrastructure
–
The adapter will act as a wireless client and connect to an access point
or wireless router.
•
Ad-Hoc
–
The adapter will connect directly to another computer, for peer-to-peer
communication, using a wireless network adapter on the remote computer, such as
SMCWPCI-N3 wireless adapter.
)
Note:
1) An Infrastructure network contains an Access Point or wireless router. All the wireless devices
or clients will connect to the wireless router or access point.
2)
An Ad-Hoc network contains only clients, such as laptops with wireless desktop adapters. All
the adapters must be in Ad-Hoc mode to communicate.
