SMC Networks SMCWBR14-3GN, User Manual

Page: 36 / 40

Initial Configuration
4-6
4
DHCP
Enables DHCP for the WAN port. The dual WAN option is disabled in the following
example.
Figure 4-7. Setup Wizard - WAN DHCP
PPPoE
Enable the wireless AP/Router IP address to be assigned automatically from an
Internet service provider (ISP) through an ADSL modem using Point-to-Point
Protocol over Ethernet (PPPoE). The dual WAN option is disabled in the following
example.
Figure 4-8. Setup Wizard - WAN PPPoE
• PPPoE Network Mode : Sets a PPPoE network mode. (Default: DHCP)
• PPPoE IP Address : Sets the static IP address. (Default: 0.0.0.0, available when
PPPoE Network Mode is set to static IP.)
• PPPoE Username : Sets the PPPoE user name for the WAN port.
(Default: PPPOE_USERNAME; Range: 1~32 characters)