![background image](http://html1.mh-extra.com/html/smc-networks/smcwbr14-3gn/smcwbr14-3gn_user-manual_1300402040.webp)
Initial Configuration
4-10
4
•
Default Gateway
: The IP address of the gateway router for the wireless AP/
Router, which is used if the requested destination address is not on the local
subnet.
•
PPTP Username
: Sets the PPTP user name for the WAN port.
(Default: PPTP_USERNAME; Range: 1~32 characters)
•
PPTP Password
: Sets a PPTP password for the WAN port. (Default:
PPTP_PASSWORD; Range: 1~32 characters)
L2TP
Enable the Layer Two Tunneling Protocol (L2TP) for implementing virtual private
networks. The service is provided across the internet in the European countries. The
dual WAN option is disabled in the following example.
Figure 4-13. Setup Wizard - WAN L2TP
•
L2TP Network Mode
: Sets a L2TP network mode. (Default: DHCP)
•
IP Address
: Sets the static IP address. (Default: 0.0.0.0, available when L2TP
Network Mode is set to static IP.)
•
Subnet Mask
: Sets the static IP subnet mask. (Default: 255.255.255.0, available
when L2TP Network Mode is set to static IP.)
•
Default Gateway
: The IP address of the gateway router for the wireless AP/
Router, which is used if the requested destination address is not on the local
subnet.
•
L2TP Username
: Sets the L2TP user name for the WAN port.
(Default: L2TP_USERNAME; Range: 1~32 characters)
Summary of Contents for SMCWBR14-3GN
