background image

A

PPENDIX

 D

  |  License Information

The GNU General Public License

–  129  –

a). Accompany it with the complete corresponding machine-readable source code, which must 

be distributed under the terms of Sections 1 and 2 above on a medium customarily used for 
software interchange; or,

b). Accompany it with a written offer, valid for at least three years, to give any third party, for a 

charge no more than your cost of physically performing source distribution, a complete 
machine-readable copy of the corresponding source code, to be distributed under the terms 
of Sections 1 and 2 above on a medium customarily used for software interchange; or,

c). Accompany it with the information you received as to the offer to distribute corresponding 

source code. (This alternative is allowed only for noncommercial distribution and only if you 
received the program in object code or executable form with such an offer, in accord with 
Subsection b above.)

The source code for a work means the preferred form of the work for making modifications to it. 
For an executable work, complete source code means all the source code for all modules it 
contains, plus any associated interface definition files, plus the scripts used to control 
compilation and installation of the executable. However, as a special exception, the source code 
distributed need not include anything that is normally distributed (in either source or binary form) 
with the major components (compiler, kernel, and so on) of the operating system on which the 
executable runs, unless that component itself accompanies the executable.

If distribution of executable or object code is made by offering access to copy from a designated 
place, then offering equivalent access to copy the source code from the same place counts as 
distribution of the source code, even though third parties are not compelled to copy the source 
along with the object code.

5.

You may not copy, modify, sublicense, or distribute the Program except as expressly provided 
under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program 
is void, and will automatically terminate your rights under this License. However, parties who 
have received copies, or rights, from you under this License will not have their licenses 
terminated so long as such parties remain in full compliance.

6.

You are not required to accept this License, since you have not signed it.  However, nothing else 
grants you permission to modify or distribute the Program or its derivative works. These actions 
are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the 
Program (or any work based on the Program), you indicate your acceptance of this License to do 
so, and all its terms and conditions for copying, distributing or modifying the Program or works 
based on it.

7.

Each time you redistribute the Program (or any work based on the Program), the recipient 
automatically receives a license from the original licensor to copy, distribute or modify the 
Program subject to these terms and conditions. You may not impose any further restrictions on 
the recipients' exercise of the rights granted herein. You are not responsible for enforcing 
compliance by third parties to this License.

8.

If, as a consequence of a court judgment or allegation of patent infringement or for any other 
reason (not limited to patent issues), conditions are imposed on you (whether by court order, 
agreement or otherwise) that contradict the conditions of this License, they do not excuse you 
from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your 
obligations under this License and any other pertinent obligations, then as a consequence you 
may not distribute the Program at all. For example, if a patent license would not permit royalty-
free redistribution of the Program by all those who receive copies directly or indirectly through 
you, then the only way you could satisfy both it and this License would be to refrain entirely from 
distribution of the Program.

If any portion of this section is held invalid or unenforceable under any particular circumstance, 
the balance of the section is intended to apply and the section as a whole is intended to apply in 
other circumstances.

It is not the purpose of this section to induce you to infringe any patents or other property right 
claims or to contest validity of any such claims; this section has the sole purpose of protecting 
the integrity of the free software distribution system, which is implemented by public license 
practices. Many people have made generous contributions to the wide range of software 
distributed through that system in reliance on consistent application of that system; it is up to the 
author/donor to decide if he or she is willing to distribute software through any other system and 
a licensee cannot impose that choice.

Summary of Contents for SMCWBR11S-3GN











































































































































Reviews: