C
HAPTER
4
| Initial Configuration
Setup Wizard
– 41 –
◆
USB Port
— Enables support for a WAN connection using a USB 3G
modem. For more information, see
“Step 3 - WAN Settings - 3G” on
page 45
. (Default: Disabled)
◆
User Name
— Sets the PPPoE user name for the WAN port.
(Default: pppoe_user; Range: 1~32 characters)
◆
Password
— Sets a PPPoE password for the WAN port.
(Default: pppoe_password; Range: 1~32 characters)
◆
Verify Password
— Prompts you to re-enter your chosen password.
◆
Operation Mode —
Enables and configures the keep alive time and
configures the on-demand idle time.
S
TEP
3 - WAN
S
ETTINGS
- PPTP
Enables the Point-to-Point Tunneling Protocol (PPTP) for implementing
virtual private networks. The service is provided in many European
countries.
Figure 19: Wizard Step 3 - WAN Settings - PPTP
The following items are displayed on this page:
◆
Ethernet Port
— Select “PPTP” for the WAN port connection from the
drop-down list.
■
Enable MAC Clone
— Some ISPs limit Internet connections to a
specified MAC address. This setting allows you to manually change