SMC Networks SMCWBR11S-3GN User Manual Download Page 109

Page: 109 / 138

HAPTER

| Administration Settings

DDNS Settings

– 109 –

DDNS S

ETTINGS

Dynamic DNS (DDNS) provides users on the Internet with a method to tie

a specific domain name to the unit’s dynamically assigned IP address.

DDNS allows your domain name to follow your IP address automatically by

changing your DNS records when your IP address changes.

The Mini 3G Broadband Router provides access to three DDNS service

providers, DynDns.org, Non-IP.com and ZoneEdit.com. To set up an DDNS

account, visit the websites of these service providers at www.dyndns.org,

www.non-ip.com, or www.zoneedit.com.

Figure 64: DDNS Settings (Router Mode)

The following items are displayed in this section on this page:

◆

Dynamic DNS Provider

— Specifies the DDNS service provider,

DynDns.org, Freedns.afraid.org, ZoneEdit.com or Non-IP.com.

(Default: none)

◆

User Name —

Specifies your user name for the DDNS service.

◆

Password

— Specifies your password for the DDNS service.

◆

HostName

— Specifies the URL of the DDNS service.

Summary of Contents for SMCWBR11S-3GN











































































































































Search results

Summary of Contents for SMCWBR11S-3GN

Reviews:

Related manuals for SMCWBR11S-3GN

Brands by name

Popular brands

SMC Networks SMCWBR11S-3GN, User Manual

Search results

Summary of Contents for SMCWBR11S-3GN

Reviews:

Related manuals for SMCWBR11S-3GN

Brands by name

Popular brands