Copy right© 2015 SMC. All Rights Reserved
na.smc.com
Page 1
I/M SMCDW30-D V2.0
1 Models
This guide covers the following model:
• SMCDW30-Z
2 Part Lists
The package contents include:
• Door-Window Sensor
• Mounting Bracket / Shim x 2
• Sensor Magnet
• Mounting Screws x 5
• CR2 Battery
• Wall Anchors x 5
• Double-Sided Tape x 2
• This Guide
3 Key Components
4 Mounting
• Do not physically mount the sensor until it has been
paired with the system.
• Do not mount the sensor directly on or near metal
framing or other large metallic objects, which can weaken
transmitted radio signal.
• Place the sensor indoors and away from sources of
water / moisture and other extreme weather conditions.
• Always mount the sensor portion of the product to fixed
location of the door or window.
• Stacking spacers provided can be used to elevate the
magnet to be closer to the sensor.
Identify the installation locations on the door or window.
Step A. Orient the sensor and magnet so the alignment
arrows face each other when the door or window is
closed. The gap between the sensor and the magnet
should be greater than 1 inch and less than 1.5
inches.
Step B. Choose to mount with either double-sided tape or
screws:
Double-sided tape:
1. Clean the surface where the sensor will be mounted,
as dust and particles can reduce the adhesion of
double-sided mounting tape you will use to mount
the sensor.
2. Peel and attach the double-sided tape to the back
of the sensor mounting bracket / shim and magnet
bracket / shim.
3. Adhere to the wall, door, or window frame.
4. Slide the sensor and magnet into the bracket / shim.
Screws:
1. Use the supplied wall anchors and screw set to
secure the mounting bracket / shim to the wall, door
or window frame.
2. Slide sensor and magnet into the bracket / shim.
SMCDW30-Z Door Window Sensor
Aignment Arrow
Magnet
Low Voltage LED (RED)
Sensor
Screws Option
Mounting Bracket/
Shim
Double-sided Tape
Option