![background image](http://html1.mh-extra.com/html/smc-networks/smc6709gl2/smc6709gl2_management-manual_1300373081.webp)
S
WITCH
S
TATIC
C
ONFIGURATION
M
ENU
4-13
Configuring the IP Address
Use the IP Configuration page to configure the switch’s IP parameters.
Field Attributes
•
IP Address
– IP address of the switch. Valid IP addresses consist of
four numbers, 0 and 255, separated by periods. Anything outside this
format will not be accepted by the configuration program.
•
Subnet Mask
– Subnet mask of the switch. This mask identifies the
host address bits used for routing to specific subnets.
•
Gateway
– Gateway used to pass trap messages from the system’s agent
to the management station. Note that the gateway must be defined if the
management station is located in a different IP segment.
Console
– Click Switch Static Configuration=>Administration
Configuration=> IP Configuration. Specify the IP address and other
parameters. Save your changes, and then reboot the switch to enable the
new settings.
Tiger Switch 10/100 6709GL2 : IP Configuration
===========================
IP Address : 192.168.16.1
Subnet Mask : 255.255.255.0
Gateway : 192.168.16.254
actions-> <Edit> <Save> <Quit>
Select the action menu.
Tab=Next Item BackSpace=Previous Item Quit=Previous Menu
Enter=Select Item
Summary of Contents for SMC6709GL2
