![background image](http://html1.mh-extra.com/html/smc-networks/smc6709gl2/smc6709gl2_management-manual_1300373105.webp)
S
WITCH
S
TATIC
C
ONFIGURATION
M
ENU
4-37
Configuring the Transmit Delay Bound
Use the “Max bridge transmit delay bound” page to set the maximum
queuing delay.
Field Attributes
•
Max bridge transmit delay bound
– Limits the time packets can
be queued in switch. If enabled, packets queued beyond the specified
time will be dropped. (Range: OFF, 1, 2, 4 seconds; Default: OFF)
•
Enable Delay Bound
– Enables a transmit delay for packets in the
low-priority queue. When enabled, any low-priority packets that exceed
the delay bound will be sent. Note that the “Max bridge transmit delay
bound control” must be enabled for the Enable Delay Bound to function.
•
Max Delay Time
– Sets the maximum queuing time for low-priority
packets. Any low-priority packets that exceed the delay bound will be
sent if the Enable Delay Bound is on. (Range: 0-255 ms; Default: 0 ms)
Console
– Click Switch Static Configuration=>Misc Configuration=>
Max bridge transmit delay bound. Specify the maximum transmit delay
bound for the overall delay permitted within the switch, enable or disable
the delay bound for the low-priority queue and set a value for this bound,
then save your settings.
Summary of Contents for SMC6709GL2
