Input voltage 1 V
5 V
Input current 4 mA 20 mA
Display
B
A
Input voltage
Display
100
0
1 V
5 V
The sub screen (label)
shows the item to be set.
When the S button is pressed and the set value (P_1) is being displayed, the set value (threshold value) can be set.
When the S button is pressed and the hysteresis (H_1) is being displayed, the hysteresis value can be set.
The number of stock items can be reduced.
The sensor input range can be set to the required value and displayed.
(Voltage input: 1 to 5 V/Current input: 4 to 20 mA)
Pressure switch/Flow switch can be displayed.
A is displayed for 1 V (or 4 mA).
B is displayed for 5 V (or 20 mA).
The range can be set as required.
For Digital Flow Switch for Water/PF3W511
Set A and B to the values shown in the table above.
A
B
PF3W504
0
4
PF3W520
0
16
PF3W540
0
40
PF3W511
0
100
Mode Examples
Hysteresis mode
Window comparator mode
Current model
PSE300AC
New
New
Switches
between
displays.
Select NPN
or PNP
Always
displayed
on one
screen.
Normal output
Set value
(Threshold value)
Normal output/
Lo side
Set value
(Threshold value)
Reverse output
Set value
(Threshold value)
Normal output/
Hi side
Set value
(Threshold value)
Hysteresis
Set hysteresis
value
Reverse
output/Lo side
Set value
(Threshold value)
Reverse
output/Hi side
Set value
(Threshold value)
1
2
3
Push
Push
Setting complete
Adjust to the set
value with the
or
button.
*
One arbitrary display mode can be added via function settings.
Set value (Threshold value)
Hysteresis value
Bottom value
Peak value
The sub screen can be switched by pressing the up/down buttons.
Measured value (Current pressure value)
Main screen
Set value (Threshold value)
Sub screen/Right side
Label (Display item)
Sub screen/Left side
Push
Push
Setting complete
Setting start
Release the buttons after “---” is
displayed on the right side sub screen.
3-Screen Display
Sensor Monitor PSE300AC
Series
Visualization of Settings
Simple 3-Step Setting
Easy Screen Switching
NPN/PNP Switch Function
Input Range Selection (for Pressure/Flow rate)
Pressing the
and
buttons for a minimum of 1 second will make
the set value (threshold value) the same as the current pressure value.
With a snapshot function for set value reading
NPN
PNP
Snap shot
function
It is possible to change the settings while checking the measured value.
2
a
