SMC Networks PSE3 A Series, Operation Manual, Page: 19 / 72

-18-
No.PS
※※
-OMU0012-A
Initial Setting
Set the pressure range, display unit and NPN/PNP output specifications of the connected sensor.
Measurement mode
Press the button between 3 and 5 seconds.
[F 0] Display the switching function of the pressure range, display unit and switch output
specifications.
Press the button. Move on to pressure range setting.
Pressure range setting
Press the or button to select pressure range.
Additional range minimum unit setting
Press or
button to select the minimum unit.
Press the button to set.
Other than [USEr] is
selected.
Press the
button to move on to
display unit setting.
Move on to the setting of the lower limit of the
additional rated range.
The lower limit of the rated range is the displayed
value when the sensor input signal is 0%.
[USEr] is selected.
Press the
button to move on to the
setting of the minimum unit of the
additional range.