SMC Networks PFMV5 Series, Operation Manual

Page: 20 / 24

-19-
No. PF
※※
-OMK0004-F
Specifications
■
Specifications
Model PFMV505 PFMV510 PFMV530 PFMV505F PFMV510F PFMV530F
Applicable fluid
Dry air, N
2
(air quality class to ISO8573-1 1.1.2 to 1.6.2, JIS B8392-1 1.1.2 to 1.6.2)
Rated flow range

1
(measurement range)
0 to 0.5
L/min
0 to 1
L/min 0 to 3
L/min
-0.5 to 0.5
*2
L/min
-1 to 1
*2
L/min
-3 to 3
*2
L/min
Repeatability ±2%F.S. max.
*3
Temperature characteristics
(25
o
C reference)
±2%F.S. max. (15 to 35
o
C)
±5%F.S. max. (0 to 50
o
C)
Pressure characteristic
(0 kPa reference

4
)
±2%F.S. max. (0 to 300 kPa)
±5%F.S. max. (-70 to 0 kPa)
Rated pressure range -70 kPa to 300 kPa
Operating pressure range -100 kPa to 400 kPa
Proof pressure 500 kPa
An
a
lo
g
ue
o
u
tp
u
t
(Non
-l
in
e
a
r o
u
tp
u
t)

5
Output voltage 1 to 5 V
Response time 5 ms or less
Output impedance Approx. 1
kΩ
Supply voltage 12 to 24 VDC±10%, ripple(p-p) 10% or less (with polarity protection)
Power consumption 16 mA or less
En
v
iro
n
m
e
n
t
Enclosure IP40
Operating fluid
temperature
0 to 50
o
C (no freezing or condensation)
Operating temp.
range Operating: 0 to 50
o
C
Storage: -10 to 60
o
C (no freezing or condensation)
Operating
humidity range
Operating, storage: 35 to 85%R.H. (no condensation)
Withstand voltage 1000 VAC, 1 min between battery and the body
Insulation resistance 50
MΩ min. (at 500 VDC) between terminals and case
Standards CE, UL, CSA, RoHS
Port size M5 x 0.8 (tightening torque: 1 to 1.5 N

m or less)
Fluid contact material PPS, Si, Au, SUS316, C3604 (electroless nickel plating)
Weight 30 g (with lead wire), 10 g (without lead wire)

1: Flow in the specification is the value at standard condition.

2: Analogue output shows 3 V when flow is zero. Changes to 5 V side when flow direction is IN

OUT. 1 V side when OUT

IN.

3: %F.S. in the table takes 4 V (1 to 5 V) as a full scale.

4: 0 kPa means release to the atmosphere.

5: Refer to the Analogue output characteristics.
Cable specifications
Conductor
Nominal cross section area approx. 0.15 mm
2
,
Individual wire diameter approx. 0.58 mm
Insulator
Outside diameter approx. 0.88 mm
Colours Brown, Blue, Black
Sheath
Material Oil-resistant, Heat resistant vinyl
Outer diameter approx.

2.6 mm