- 17 -
！
W a r n i n g
(1) Do not operate the release bolt until safety is confirmed. Do not twist
a) Examples when used in combination with an air cylinder.
b) Carefully confirm that personnel are not within the moving range of the load and there is no danger, even if
the load moves suddenly.
(2) Exhaust all residual pressure in the system and turn off the power supply before screwing in the
lock release bolt. Do not supply air pressure to the lock release port when the lock is manually
unlocked.
(3) Take action to prevent the load from falling when unlocked.
a) Place the load at the end of the downward stroke.
b) Place guides, etc. to stop the load from falling.
c) When the lock unit is used together with an air cylinder , confirm that forces at both ends of the piston are
balanced.
！
C a u t i o n
When releasing the locked state with the release bolt for the purpose of mounting or adjustment, be
sure to return the release bolt to the locked state.
If the release bolt is not returned to the locked state, the lock might not function correctly or lock
release might not be completed due to air leakage from the release bolt.
Summary of Contents for MWB 100 Series
Page 7: ... 7 Selection graph ...
