SMC Networks MHM-25D-X7400A-DTP-N, Operation Manual

Page: 38 / 43

- 37 -
3. Installation Settings Tab
* To change the setting, set the security access level to the administration level.
(1) Gripper operation completion waiting time
This is the set value for the waiting time after the valve is operated for the gripper holding/releasing
action to turn on.
Adjust the holding of the exhaust restrictor and enter an appropriate value according to the gripper
holding/releasing operation time. The default value is 500ms. It can be set in the range of 0 to 1000ms.
(2) Status signal output to digital output port.
Select whether to output a status signal to the digital output port
when “Hold/Release success” or
“Hold/Release failure” is detected.
When “Enabled” is selected:
Selection of the digital output port is enabled. If either of "Hold/Relea
se success” and “Hold/Release
failure” is detected, the corresponding digital output port is turned on.
When “Disabled” is selected:
The selection of the digital output port is disabled. Even if either of "Hold/Release
success” and
“Hold/Release failure” is detected, no status signal is output.
(3) Select a digital output port
Selected box operation is enabled when “Output status signal to digital output port” is enabled. Select
the digital output port to which a status
signal is output when “Hold/Release success” or “Hold/Release
failure” is detected.