－
10
－
4-3. Allowable eccentric load
Caution
Make sure that the load mass (W) is within the range in the graph below when there
is an eccentric distance (L) from the center of the cylinder. Using cylinders are
beyond the limit may shorten the product service life or cause damage.
4-4. Allowable rotating torque of the plate
Caution
The rotating torque (T) applied to the plate (the rod end) should be not more than the values shown
in the table below. If this cylinder is operated outside of the limited range, it may reduce the life time
or damage the machine.
Figure 4-3
！
！
2021-06-28 11:26
DC006789
