- 6 -
Take the following steps to avoid malfunction due
to noise.
1. Install a line filter etc. to the AC power line to
reduce / eliminate power supply noise.
2. Avoid malfunction due to noise by installing this
product and its wiring away from strong electric
fields, such as those of motors and power
cables, etc.
3. Be sure to implement protective measures
against load surge for inductive loads (solenoid
valves, relays etc.).
4. Turn off the power supply before inserting or
removing the connector.
5. Ground the F.G. terminal at the front of the main
body.
Please note that the right angled cable connector
does not rotate and is limited to only one entry
direction.
Wiring method
Wiring diagram (Ground the F.G. terminal)
△△△△
,
！
！
！
！
Caution
Ground the F.G. terminal at the front of the main body
If the ground terminal (F.G.) is not used, this product may not operate correctly due to noise.
If the field ground fluctuates due to noise, it may affect the operation of the product.
Wiring diagram (Power supply and input signal)
△△△△
,
！
！
！
！
Caution
