-17-
No.PS
※※
-OMJ0004-E
5. Hysteresis (
)
The hysteresis can be set.
<How to perform>
1. Keep pressing the
button for 2 seconds or longer in the measurement mode.
After [
] is indicated, press the
button four times.
Then, [
] and current setting appears in turn.
2. Press the
or
button to select the hysteresis.
Press the
button once to increase by one figure and press it continuously to keep set figure
increased.
Press the
button once to decrease by one figure and press it continuously to keep set figure
decreased.
3. Keep pressing the
button for 2 seconds or longer after selection is completed.
Then, the setting is finished, and the measurement mode returns.
6. Output type (
)
A desired output mode can be set freely for switch output.
For the operation in normally open and normally closed,
refer to "List of output mode" on page
<How to perform>
1. Keep pressing the
button for 2 seconds or longer in the measurement mode.
After [
] is indicated, press the
button five times.
Then, [
] and current setting appears in turn.
2. Press the
or
button to select the output type.
3. Keep pressing the
button for 2 seconds or longer after selection is completed.
Then, the setting is finished, and the measurement mode returns.
