HEC-OM-S002
Chapter 1 Safety Instructions
1.6 Safety Measures
1-8
1.6.2 Protective
Equipment
Protective
goggles
Mask Gloves Safety
shoes
Fig. 1-5 Protective equipment
1.6.3 Long-term
Storage
1.6.4 Disposing
of Product
When disposing of this product, be sure to use an industrial waste
processing vendor that conforms to the “Law concerning disposal of waste
and cleaning” and the “Ordinance defined by each municipal corporation”.
Dispose of the Bath liquid in the manner described in the MSDS.
z
Keep within the margin of safety in relation to cooling and heating
capacity.
z
When restarting the power supply, wait 3 sec or more after the
indications on the display light off.
z
Wear protective equipment in order to maintain safety when
installing and/or handling the product.
When handling chemicals for the product especially, note the
contents of the MSDS and wear protective goggles, gloves, and a
mask.
z
Touching the bath liquid and inner surface of the liquid bath may
cause burns or frostbite depending on the temperature set for this
product. Be sure to use heat (cold) resistant gloves when handling
this product.
z
Turn OFF main power switch and remove all cables and piping
from the product.
z
Completely empty the bath liquid from the liquid bath. Also, do not
allow foreign matter to enter the inside of the bath.
z
Drain facility water from the facility water connection.