SMC Networks IDFB60-23-C, Operation Manual, Page: 5 / 52

IDX-OM-V024
Chapter 1 Safety Instructions
IDFB60/70/80/90 Series 1.1
Before Using Air Dryer.
1-1
Chapter 1 Safety Instructions
1.1 Before Using Air Dryer.

This chapter is intended to specifically describe the safety related issues for handling the product.
Read this before handling the product.

This product is for dehumidification of compressed air. We, as the manufacturer, cannot take any
responsibility if used for any other purpose.

The product operates with high voltage and has some parts that get hot or rotates during operation. If
a component needs to be replaced or repaired, contact a specialized vendor for parts and service.

All personnel who work with or around the product should read and understand the safety related
information in this manual carefully before starting work.

This operation manual is not a general safety manual which is practiced by safety training
representatives.

People who handle this product or work around it need to take training to understand the inherent
risks and master safety measures.

The safety manager is responsible for strictly observing safety standards, but responsibility in respect
to safety standards during daily work resides with each individual operator and maintenance
personnel.

Operators and maintenance representatives should take the safety of all personnel in the work
environment into account.

It is necessary to think of the safety of the work place environment for each task.

If the product is subjected to a short power outage (including voltage sag), it may take a long time to
resume normal operation or be unable to restart normally due to the protective equipment triggered
after the power is recovered. In this case, turn off the switch of the product and reset the protection
circuit referring to 6.2 Reset the Thermal relay and High Pressure Switch. It is possible that the
product suddenly after the power is recovered. Turn off the switch with light when removing the cover
panel.

This manual must be kept available to operators whenever necessary.
1.1.1 Danger, Warning and Caution
The instructions given in this manual aim to ensure that the product is operated in a safe and correct way.
This will prevent injury to operators and damage to the product. These instructions are grouped into three
categories, "Danger", "Warning" and "Caution", which indicate the level of hazard, damage and also the
degree of emergency. Contents with these signs are important instructions concerning safety. Confirm
where those signs are, and read and comprehend notices and cautionary notices fully before handling.
“
DANGER
”, “
WARNING
” and “
CAUTION
” signs are in order according to severity (DANGER>
WARNING> CAUTION). The meanings of these signs are as follows.
Before using the product, be sure to read and understand all the
important actions highlighted in this manual.
"WARNING": Hazard that MAY cause serious personal injury or death during operation,
maintenance or inspection due to the negligence of required procedure or warning to avoid
the danger.
WARNING
"CAUTION": Hazard that WILL cause minor personal injury or damage to the device or
equipment during operation, maintenance or inspection due to the negligence of required
procedure or warning to avoid the danger.
CAUTION
“DANGER”: Hazard that WILL cause serious personal injury or death during operation,
maintenance or inspection due to incorrect handling or negligence of compliance to avoid
the danger.
DANGER