![background image](http://html1.mh-extra.com/html/smc-networks/idf190d-3-cw/idf190d-3-cw_operation-manual_1299708005.webp)
IDX-OM-Y002
Chapter 1
Safety
IDF190D/240D Series
1.1
Before Using the Air Dryer
1-1
Chapter 1 Safety
1.1 Before Using the Air Dryer
This chapter is intended to specifically describe the safety related issues for handling the product.
Read this before handling the product.
This product is for dehumidification of compressed air. We, as the manufacturer, cannot take any
responsibility if used for any other purpose.
The product operates with high voltage and has some parts that get hot or rotates during operation. If
a component needs to be replaced or repaired, contact a specialized vendor for parts and service.
All personnel who work with or around the product should read and understand the safety related
information in this manual carefully before starting work.
This service manual is not a general safety manual.
People who handle this product or work around it need to take training to understand the inherent risks
and master safety measures.
The safety manager is responsible for strictly observing safety standards, but responsibility in respect
to safety standards during daily work resides with each individual operator and maintenance
personnel.
Operators and maintenance representatives should take the safety of all personnel in the work
environment into account.
It is necessary to think of the safety of working place and work environment for each task.
If the product is subjected to a short power outage (including voltage sag), it may take a long time to
resume normal operation or be unable to restart normally due to the protective equipment triggered
after the power is recovered. Should this happen, turn the product off using the switch with lightand
reset the protection circuits referring to 6.2 - Reset the Thermal relay and High Pressure Switch. It is
possible that the product starts suddenly after the power is recovered. Turn off the switch with light
when removing the cover panel.
This manual must be kept available to operators whenever necessary.
1.1.1
Danger, Warning and Caution in This Manual
The instructions given in this manual aim to ensure that the product is operate in a safe and correct way.
These instructions are grouped into three categories, “Danger, “”Warning”, and “Caution”, which indicate
the level of hazard, damage and also the degree of emergency. Read these statements carefully and
thoroughly understand them and location of the instruction before operating or performing maintenance
on the unit.
“
DANGER
”, “
WARNING
” and “
CAUTION
” signs are in order according to severity
(DANGER> WARNING> CAUTION). The meanings of these signs are as follows.
Before using the product, be sure to read and understand all the
important actions highlighted in this manual.
"WARNING": Hazard that may cause serious personal injury or death during operation,
maintenance or inspection due to the negligence of required procedure or warning to avoid
the danger.
WARNING
“DANGER": Hazard that will cause serious personal injury or death during operation,
maintenance or inspection due to incorrect handling or negligence of compliance to avoid
the danger.
DANGER
"CAUTION": Hazard that Will cause minor personal injury or damage to the device or
equipment during operation, maintenance or inspection due to the negligence of required
procedure or warning to avoid the danger.
CAUTION