![background image](http://html1.mh-extra.com/html/smc-networks/idf190d-3-cw/idf190d-3-cw_operation-manual_1299708047.webp)
IDX-OM-Y002
Chapter 9
Option
M
IDF60/70/80/90 Series
9.3
Installation of Motor type Auto Drain
9-3
9.3 Installation of Motor type Auto Drain
1) Screw the nipple and the motor type auto drain (drain inlet port hex size: 30mm) into the connection
port of this product in order. Mount the auto drain vertically while facing the drain port downwards.
(Allowable inclination difference in the vertical direction is 5°)
Note 1) Apply sealant tape or sealant to fit the barrel nipple and long nipple. Tightening torque: 28 to
30N
・
m
2) Screw-in an elbow union (size: 17mm) to the drain outlet port and mount the drain tube.
3) Connect the two wires from the auto-drain to the two wires from the product. Drip proof connectors
are used, which can be connected by hand. Ensure they are firmly connected.
9.4 Electrical circuit diagram
Refer to 7.4 Electrical circuit diagram (page 7-4 and 7-5) for electric circuit.
Motor operated auto drain
Nipple
Drip proof connector
Replacement parts number Table 1