SMC Networks HRR010-A-10 Series, Operation Manual

Page: 32 / 166

HRX-OM-X084
Chapter 3 Transport and Setting Up
3.3 Installation HRR Series
3-10
3.3.3 Preparation and wiring of power supply cable

The electrical facilities should be installed and wired in accordance
with local laws and regulations of each country and by a person who
has knowledge and experience.

Check the power supply. Operation with voltages, capacities and
frequencies other than the specified values can cause fire and electric
shock.

Wire with an applicable cable size and terminal. Forcibly mounting
with an unsuitably size cable may result in heat generation or fire.
Be sure to lock out and tag out the breaker of the facility power supply
(customer power supply facility) before wiring.
Be sure to connect the power supply cable from the product side first,
and then connect the breaker of the facility power supp
ly (the user’s
machine power supply).

Please wear protective gloves.

Use a separate outlet or earth leakage breaker.

Be sure to perform grounding (earth).

Failure to do so may cause malfunction or electric shock.