HRX-OM-J022
1 Safety Instructions
1.3 Hazard Warning Label
HRG001-W HRG002-W HRG005-W
1
st
edition : Jul. 2005
1-4
1.3 Hazard Warning Label
The hazard warning labels indicate where potential hazards are present
during unit operation and maintenance. Be sure to read the labels and
recognize the locations of the labels before starting work.
1.3.1
Classification of risks
High voltage hazards
The unit is operated at high voltage and may cause an electrical shock. The
attached label contains the symbol
.
High temperature hazards
The unit reaches high temperature during operation and may cause burns
when an operator comes in contact. The attached label contains the symbol
.
Rotating object hazards
The unit includes several parts that rotate during operation and may cause
the operator to get the finger caught in these parts. The attached label
contains the symbol
.
Do not operate the unit without the cover panel mounted.
The unit contains the power supply carrying high voltage inside that is
isolated with the cover panel. Unit operation without the cover panel
allows the high votage to apply outside and cause injuries.
Only trained personnel are allowed to work around the power supply.
This symbol indicates the presence of a section where temperature
reaches high and the operator sustains burns when coming in contact.
Even after the power is turned off, residual heat may still cause burns.
The work must not be started until the section drops to sufficiently low
temperature.
The unit includes several parts which rotate during operation, and the
operator who comes in contact may get injured. Even if that part
seems to stop rotating, avoid touching it because the condition may
be temporary and the rotation may restart.
