- 14 -
12.
Precautions on handling
Caution
Keep the precautions to prevent accidents accompanying injury and a failure of the
product resulting in peripheral equipment damage.
1) Surrounding environment and Set-up Environment
(1) Do not use this product in the following environments.
①
Environments containing splashing water, salt water, oil, or various chemicals (including chemical
mists).
②
Environments containing particles and dust.
③
Environments containing corrosive gas, solvents and flammable gas.
④
Envirnoments containing direct sunlight and radiant heat.
⑤
Environments having ambient temperatures over the following range:
Operation
10 to 35
o
C
Storage
0 to 50
o
C
(with no recirculating fluid and with
cooling water in the liquid tank and piping).
⑥
Environments having ambient humidity over the following range:
Operation
35 to 80%
Storage
35 to 85%
⑦
Environments with sharp temperature changes.
⑧
Environments generating strong magnetic noise (having a strong electric or magnetic field that
generates surges.)
⑨
Environments generating electrical static discharge and conditions in which static electricity is
applied to this product.
⑩
Environments generating strong high frequency radiation (including radio frequency appliances
such as mobile phones and tranceivers).
⑪
Environments generating strong vibrations and impacts.
⑫
Environments that may be damaged by lightning.
⑬
Environments in which forces or gravity may deform the body of the product.
⑭
Locating the cables of the product near the power lines of other machines.
⑮
Conditions in which insufficient grounding for the power supply is provided
⑯
Conditions that cause dew condensation (this may occur on the surface of the piping when the
cooling water temperature is low).
⑰
Environments containing harmful gases such as silicone.
⑱
Places not allowing a space of 50mm or more at the air inlet of the Controller and thus causing the
sucking of exhausted heat from the air inlet.
⑲
Places preventing the horizontal set-up of the product.
(2) This product uses a fan and generates dust. When it is set up and operated in a clean room, take
appropriate preliminary measures for dust.
