- 6 -
Note 1) Differs depending on operating conditions.
Note2) Determined under the following conditions: water as the recirculating fluid, set temperature 25
℃
,
cooling water temperature 25
℃
, flow rate 3L/min, ambient temperature 25
℃
, and sealed from outside
air with a lid.
Note 3) GALDEN
○
R
is a trade mark of Solvay Solexis and Fluorinert
TM
is a trade mark of 3M.
Note 4) An appropriate range is from 3 to 5L/min. To prevent damage to the radiating system, do not supply a
flow over the maximum flow rate of 8L/min.
Note 5) When the temperature is set high, the liquid temperature inside of the liquid tank and the temperature
inside of the thermostat could differ greatly depending on the heating mode at start-up, and the
thermostat could then begin operating and stop the output.
