Affixing Brackets
We have supplied 2 special brackets that easily attaches to the
Converter. This allows for the secure placement of the Converter into
the Chassis. It also seals off the front of Chassis and allows it to
function correctly.
Step 1
Using a Phillips screwdriver, remove two screws from the side
panels on the converter.
Step 2
Place the converter and brackets on a flat horizontal surface as
illustrated above. Secure the brackets by replacing the screws.
Ensure that the rails are flush-mounted with the underside of the
Converter. The Converter is now ready for loading into the Chassis.
Installing the Converter
Once the Converter has been attached to the bracket, it can be
installed into the Chassis. Special care must be taken to ensure
the correct mating of the power connector. Align the Converter so
that it fits between the upper and lower guide rails.
Warning
Always ensure that the converter power socket is positioned at
the base of the Chassis. Never force the Converter into the
Chassis - check power socket position and alignment.
Rear view of Chassis and specifications
Rear View of Chassis with AC Power Supply
Power:
100 - 240V AC (Optional 12V Adapter)
Dimensions:
109 x 174 x 44.3 mm (L x W x H)
Rear View of Chassis with DC Power Supply
Power:
-48V DC (Optional 12V Adapter)
Dimensions:
109 x 174 x 44.3 mm (L x W x H)
English
English
19
20
!
