background image

L

IMITED

 W

ARRANTY

Limited Warranty Statement: 

SMC Networks, Inc. (“SMC”) warrants its products to 

be free from defects in workmanship and materials, under normal use and service, for 
the applicable warranty term. All SMC products carry a standard 90-day limited 
warranty from the date of purchase from SMC or its Authorized Reseller. SMC may, at 

its own discretion, repair or replace any product not operating as warranted with a 
similar or functionally equivalent product, during the applicable warranty term. SMC 
will endeavor to repair or replace any product returned under warranty within 30 days 

of receipt of the product. 
The standard limited warranty can be upgraded to a Limited Lifetime* warranty by 
registering new products within 30 days of purchase from SMC or its Authorized 

Reseller. Registration can be accomplished via the enclosed product registration card 
or online via the SMC web site. Failure to register will not affect the standard limited 
warranty. The Limited Lifetime warranty covers a product during the Life of that 

Product, which is defined as the period of time during which the product is an 
“Active” SMC product. A product is considered to be “Active” while it is listed on the 
current SMC price list. As new technologies emerge, older technologies become 

obsolete and SMC will, at its discretion, replace an older product in its product line 
with one that incorporates these newer technologies. At that point, the obsolete 
product is discontinued and is no longer an “Active” SMC product. A list of 

discontinued products with their respective dates of discontinuance can be found at:  

http://www.smc.com/index.cfm?action=customer_service_warranty
All products that are replaced become the property of SMC. Replacement products 
may be either new or reconditioned. Any replaced or repaired product carries either a 

30-day limited warranty or the remainder of the initial warranty, whichever  is longer. 
SMC is not responsible for any custom software or firmware, configuration  
information, or memory data of Customer contained in, stored on, or integrated with 

any products returned to SMC pursuant to any warranty. Products returned to SMC 
should have any customer-installed accessory or add-on components, such as 
expansion modules, removed prior to returning the product for replacement. SMC is 

not responsible for these items if they are returned with the product.
Customers must contact SMC for a Return Material Authorization number prior to 
returning any product to SMC. Proof of purchase may be required. Any product 

returned to SMC without a valid Return Material Authorization (RMA) number clearly 
marked on the outside of the package will be returned to customer at customer's 
expense. For warranty claims within North America, please call our toll-free customer 

support number at (800) 762-4968. Customers are responsible for all shipping charges 
from their facility to SMC. SMC is responsible for return shipping charges from SMC 
to customer.

WARRANTIES EXCLUSIVE: 

IF AN SMC PRODUCT DOES NOT OPERATE 

AS WARRANTED ABOVE, CUSTOMER’S SOLE REMEDY SHALL BE REPAIR 
OR REPLACEMENT OF THE PRODUCT IN QUESTION, AT SMC’S OPTION. 

THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND 
ARE IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS 
OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY 

OR OTHERWISE, INCLUDING WARRANTIES OR CONDITIONS OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SMC 
NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO 

ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE 
SALE, INSTALLATION, MAINTENANCE OR USE OF ITS PRODUCTS. SMC 
SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND 

EXAMINATION DISCLOSE THE ALLEGED DEFECT IN THE PRODUCT 
DOES NOT EXIST OR WAS CAUSED BY CUSTOMER'S OR ANY THIRD 

Summary of Contents for FS5 - annexe 1




























Reviews: