EZ Switch 10/100
6
TROUBLESHOOTING
1.
Symptom
Power LED does not light after powering on the
switch.
Probable Causes
Power outlet or power cord may be defective.
Possible Solutions
•
Check for loose connections.
•
Check the power outlet by using it with another
device.
•
Replace the power cord.
2.
Symptom Link
LED does not light after a connection is made.
Probable Causes
Switch port, network card or cable may be defective.
Possible Solutions
•
Check that the Switch and attached device are
both powered on.
•
Be sure the network cable is connected to both
devices.
•
Verify that Category 5 cable is used for 100 Mbps
connections and that the length of any cable does
not exceed 100 meters (328 feet).
•
Check the network card and cable connections
for defects.
•
Replace the defective card or cable if necessary.
