SMC Networks EZ Switch SMCGS1601P, User Manual

Page: 7 / 40

C
OMPLIANCES AND
S
AFETY
S
TATEMENTS
– 7 –
I
NDUSTRY
C
ANADA
- C
LASS
A
This digital apparatus does not exceed the Class A limits for radio noise
emissions from digital apparatus as set out in the interference-causing
equipment standard entitled “Digital Apparatus,” ICES-003 of the Department of
Communications.Cet appareil numérique respecte les limites de bruits
radioélectriques applicables aux appareils numériques de Classe A prescrites
dans la norme sur le matériel brouilleur: “Appareils Numériques,” NMB-003
édictée par le ministère des Communications.
P
LEASE READ THE FOLLOWING SAFETY INFORMATION CAREFULLY BEFORE
INSTALLING THE
S
WITCH
:
W
ARNING
: Installation and removal of the unit must be carried out by qualified
personnel only.
◆ This guide is intended for use by network administrators who are
responsible for setting up and installing network equipment; consequently it
assumes a basic working knowledge of LANs (Local Area Networks).
◆
The unit must be connected to an earthed (grounded) outlet to comply with
international safety standards.
◆
Do not connect unit to an A.C outlet (power supply) without an earth
(ground) connection.
◆ The appliance coupler (the connector to the unit and not the wall plug)
must have a configuration for mating with an EN 60320/IEC 320 appliance
inlet.
◆
The socket outlet must be near to the unit and easily accessible. You can
only remove power from the unit by disconnecting the power cord from the
outlet.
◆
This unit operates under SELV (Safety Extra Low Voltage) conditions
according to IEC 60950. The conditions are only maintained if the
equipment to which it is connected also operates under SELV conditions.